Dell Precision 3650 Tower, Руководство по обслуживанию

Страница: 21 / 70

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector.
2. Insert the solid-state drive at a 45-degree angle into the slot on the system board.
3. Replace the screw (M2x3.5) to secure the M.2 2280 solid-state drive to the system board.
Next steps
1. Close the PSU cage
2. Install the side cover .
3. Follow the procedure in after working inside your computer .
2.5-inch hard drive
Removing the 2.5-inch hard-disk drive
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the side cover .
3. Open the PSU cage .
About this task
The following images indicate the location of the 2.5-inch hard-disk drive assembly and provide a visual representation of the
removal procedure.
Disassembly and reassembly 21