Dell Precision 3650 Tower Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 70

background image

Table 12. System setup options—Update, Recovery menu (continued)

Update, Recovery

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.

By default, the option is enabled.

BIOSConnect

Enable or disable cloud Service OS recovery if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option and local Service OS does not
boot or is not installed.

By default, the option is enabled.

Dell Auto OS Recovery Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.

By default, the threshold value is set to 2.

Table 13. System setup options—System Management menu

System Management

Service Tag

Display the Service Tag of the computer.

Asset Tag

Create a computer Asset Tag.

Wake on LAN/WLAN

Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.

By default, the

Disabled

option is selected.

Auto on Time

Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.

By default, the option is disabled.

Intel AMT Capability

Enable Intel AMT Capability

Enable or disable the Intel AMT capabilty.

By default, the

Restrict MEBx Access

option is enabled.

MEBx Hotkey

Enable or disable MEBx hotkey.

By default, the option is disabled.

USB Provision

Enable USB Provision

Enable or disable the Intel AMT provisioning using the local provisioning file
through a USB storage device.

By default, the option is disabled.

SERR Messages

Enable or disable SERR messages.

By default, the option is enabled.

Dell Development Configuration

Enable Flash Updated Signature Override

Enable or disable certain features to control BIOS

By default, the option is disabled.

Table 14. System setup options—Keyboard menu

Keyboard

Keyboard Errors

Enable Keyboard Error Detection

Enable or disable the keyboard error detection.

System setup

57

«
...
55
56
57
58
59
...
»

Содержание Precision 3650 Tower







































































Отзывы:

Нет отзывов

Похожие инструкции для Precision 3650 Tower

iPAQ H3700 Series

Бренд: Compaq Страницы: 56

PC 300GL Type 6285

Бренд: IBM Страницы: 96

Бренд: Advantech Страницы: 17

eBOX560-500-FL Series

Бренд: AXIOMTEK Страницы: 62

Бренд: Uplift Desk Страницы: 2

Бренд: Lenovo Страницы: 61

Бренд: Lenovo Страницы: 66

Бренд: Lenovo Страницы: 92

Бренд: Lenovo Страницы: 68

Бренд: Lenovo Страницы: 68

Бренд: Lenovo Страницы: 68

Бренд: Lenovo Страницы: 106

Бренд: Lenovo Страницы: 68

Бренд: Lenovo Страницы: 142

Бренд: Lenovo Страницы: 170

Бренд: Lenovo Страницы: 118

Бренд: Lenovo Страницы: 110

Бренд: Lenovo Страницы: 204

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды