Dell PowerVault TL1000, Руководство пользователя

Страница: 24 / 192

The encryption enabled drive contains the necessary hardware and firmware to encrypt and decrypt host
tape application data. Encryption policy and encryption keys are provided by the host application or host
server. A drive digital certificate is installed at manufacturing time. Each drive receives a unique serial
number and certificate. The T10 application validates each drive instance by checking the drive’s digital
certificate.
The encryption-capable library firmware allows the user to select None or Application Managed
encryption from the Web User Interface. If the library was purchased with the Library Managed
Encryption feature, Library Managed Encryption can also be selected. The factory default is None.
Supported Internet Protocols
The TL1000 Tape Autoloader supports the Internet protocols:
v
IPv4
v IPv6
To learn more about IPv4, visit http://www.iana.org/. To learn more about IPv6, visit
http://www.ipv6.org/..
Simple Network Management Protocol (SNMP) messaging
Occasionally, the library might encounter a situation that you want to know about, such as an open
magazine or a fault that causes the library to stop. The library provides a standard TCP/IP protocol
called Simple Network Management Protocol (SNMP) to send alerts about conditions (such as need for
operator intervention) over a TCP/IP LAN network to an SNMP monitoring station. These alerts are
called SNMP traps. With the information supplied in each SNMP trap, the monitoring station (together
with customer-supplied software) can alert operations personnel of possible problems or operator
interventions that occur.
SNMP traps
SNMP Traps are alerts or status messages that can be collected, monitored, and used to proactively
manage attached libraries with SNMP protocol with the SNMP monitoring stations. In summary, each
trap provides the following information:
v Product Identification such as product name, description, manufacturer, model number, firmware
level, and the URL that the trap is designated for.
v Product Status such as the severity of the trap, status (current and previous) and the time the trap
occurred.
v Library State (physical device status) such as identification and status of devices that is monitored. It
would include enclosure, power supply, controller, magazine status, drive count, cartridge slot count,
and I/O station count. Also included would be certain library statistics, and where appropriate, the
fault FSC (fault symptom code) including the severity and description of that fault.
v Drive Status such as the identification of each drive in the library, firmware level, serial number, and
other address and status information.
v Trap Definitions such as library status change, open magazine, I/O accessed, hard fault information,
requests to clean the drive, excessive retries, and returning to normal operations.
v SNMP MIBs : The library's Management Information Base (MIB) contains units of information that
specifically describe an aspect of the system, such as the system name, hardware number, or
communications configuration. When with SNMP to monitor your TL1000 Tape Autoloader, make sure
that the TL1000 MIB file is loaded on your SNMP monitoring station. SNMP traps are sent to the
SNMP monitoring stations that are defined for your library (see “Configuring SNMP trap notifications”
on page 81).
6
Dell PowerVault TL1000 Tape Autoloader: User's Guide