Dell PowerVault DX6104-CSN Скачать руководство пользователя страница 106

Страница: 106 / 123

Error Code

Message Information

AMP0302

Message

The system board <

name

> current is greater than the upper warning

threshold.

Details

System board <

name

> current is outside of the optimum range.

Action

1. Review system power policy.
2. Check system logs for power related failures.
3. Review system configuration changes.
4. If the issue persists, see

Getting Help

AMP0303

Message

The system board <

name

> current is greater than the upper critical

threshold.

LCD Message

System board <

name

> current is outside of range.

Details

System board <

name

> current is outside of the optimum range.

Action

1. Review system power policy.
2. Check system logs for power related failures.
3. Review system configuration changes.
4. If the issue persists, see

Getting Help

ASR0000

Message

The watchdog timer expired.

Details

The operating system or an application failed to communicate within
the time-out period.

Action

Check the operating system, application, hardware, and system event
log for exception events.

ASR0001

Message

The watchdog timer reset the system.

Details

The operating system or an application failed to communicate within
the time-out period. The system was reset.

Action

Check the operating system, application, hardware, and system event
log for exception events.

ASR0002

Message

The watchdog timer powered off the system.

Details

The operating system or an application failed to communicate within
the time-out period. The system was shut down.

Action

Check the operating system, application, hardware, and system event
log for exception events.

106

Содержание PowerVault DX6104-CSN




























































































































Результаты поиска

Содержание PowerVault DX6104-CSN

Отзывы:

Похожие инструкции для PowerVault DX6104-CSN

Бренды по названию

Популярные бренды

Dell PowerVault DX6104-CSN, Руководство пользователя

Результаты поиска

Содержание PowerVault DX6104-CSN

Отзывы:

Похожие инструкции для PowerVault DX6104-CSN

Бренды по названию

Популярные бренды