40
Using the System Setup Program
Using the System Password
After a system password is assigned, only those who know the password have
full use of the system. When the
System Password
option is set to
Enabled
,
the system prompts you for the system password after the system starts.
NOTE:
If you have assigned a setup password (see "Using the Setup Password" on
page 42), the system accepts your setup password as an alternate system
password.
Assigning a System Password
Before you assign a system password, enter the System Setup program and
check the
System Password
option.
When a system password is assigned, the setting shown for the
System
Password
option is
Enabled
. If the setting shown for the
Password Status
is
Unlocked
, you can change the system password. If the
Password Status
option is
Locked
, you cannot change the system password. When the system
password feature is disabled by a jumper setting, the system password is
Disabled
, and you cannot change or enter a new system password.
When a system password is not assigned and the password jumper on the
system board is in the enabled (default) position, the setting shown for the
System Password
option is
Not Enabled
and the
Password Status
field is
Unlocked
. To assign a system password:
1
Verify that the
Password Status
option is set to
Unlocked
.
2
Highlight the
System Password
option and press <Enter>.
3
Type your new system password.
You can use up to 32 characters in your password.
As you press each character key (or the spacebar for a blank space), a
placeholder appears in the field.
The password assignment is case-sensitive. However, certain key
combinations are not valid. If you enter one of these combinations, the
system beeps. To erase a character when entering your password, press the
<Backspace> key.
NOTE:
To escape from the field without assigning a system password, press
<Enter> to move to another field, or press <Esc> at any time prior to
completing step 5.
book.book Page 40 Wednesday, April 15, 2009 8:47 PM
Содержание PowerEdge T105 Systems
