Dell PowerEdge R740xd, Инструкция по установке и обслуживанию

Страница: 57 / 210

Option Description
NOTE: BIOS update requires HECI devices to be operational and DUP updates require IPMI interface to
be operational. This setting needs to be set to Enabled to avoid updating errors.
Intel AES-NI Improves the speed of applications by performing encryption and decryption by using the Advanced Encryption
Standard Instruction Set (AES-NI). This option is set to
Enabled by default.
System Password Sets the system password. This option is set to Enabled by default and is read-only if the password jumper is not
installed in the system.
Setup Password Sets the setup password. This option is read-only if the password jumper is not installed in the system.
Password Status Locks the system password. This option is set to Unlocked by default.
TPM Security
NOTE: The TPM menu is available only when the TPM module is installed.
Enables you to control the reporting mode of the TPM. The TPM Security option is set to Off by default. You can
only modify the TPM Status, TPM Activation, and the Intel TXT fields if the TPM Status field is set to either On
with Pre-boot Measurements or On without Pre-boot Measurements .
When TPM 1.2 is installed, the TPM Security option is set to Off , On with Pre-boot Measurements , or On
without Pre-boot Measurements .
When TPM 2.0 is installed, the TPM Security option is set to On or Off . This option is set to Off by default.
TPM Information Changes the operational state of the TPM. This option is set to No Change by default.
TPM Status Specifies the TPM status.
TPM Command Controls the Trusted Platform Module (TPM). When set to None , no command is sent to the TPM. When set to
Activate , the TPM is enabled and activated. When set to Deactivate , the TPM is disabled and deactivated. When
set to Clear , all the contents of the TPM are cleared. This option is set to None by default.
CAUTION: Clearing the TPM results in the loss of all keys in the TPM. The loss of TPM keys may affect
booting to the operating system.
This field is read-only when TPM Security is set to Off . The action requires an additional reboot before it can take
effect.
Intel(R) TXT Enables or disables the Intel Trusted Execution Technology (TXT) option. To enable the Intel TXT option,
virtualization technology and TPM Security must be enabled with Pre-boot measurements. This option is set to Off
by default.
When TPM 2.0 is installed,
TPM 2 Algorithm option is available. It enables you to select a hash algorithm from
those supported by the TPM (SHA1, SHA256). TPM 2 Algorithm option must be set to SHA256 , to enable TXT.
Power Button Enables or disables the power button on the front of the system. This option is set to Enabled by default.
AC Power Recovery Sets how the system behaves after AC power is restored to the system. This option is set to Last by default.
AC Power Recovery
Delay Sets the time delay for the system to power up after AC power is restored to the system. This option is set to
Immediate by default.
User Defined Delay
(60 s to 240 s) Sets the User Defined Delay option when the User Defined option for AC Power Recovery Delay is selected.
UEFI Variable
Access Provides varying degrees of securing UEFI variables. When set to Standard (the default), UEFI variables are
accessible in the operating system per the UEFI specification. When set to Controlled , selected UEFI variables are
protected in the environment and new UEFI boot entries are forced to be at the end of the current boot order.
Secure Boot Enables Secure Boot, where the BIOS authenticates each pre-boot image by using the certificates in the Secure
Boot Policy. Secure Boot is set to
Disabled by default.
Secure Boot Policy When Secure Boot policy is set to Standard , the BIOS uses the system manufacturer’s key and certificates to
authenticate pre-boot images. When Secure Boot policy is set to Custom , the BIOS uses the user-defined key and
certificates. Secure Boot policy is set to Standard by default.
Pre-operating system management applications 57