manualshive.com logo in svg

Dell PowerEdge HX574, Руководство владельца оборудования

Поделиться
Скачать
Dell PowerEdge HX574 Скачать руководство пользователя страница 15

About Your System

15

4

LCD display

Provides system ID, status information, 
and system error messages. 

The LCD display lights during normal 
system operation. Both the systems 
management software and the 
identification buttons located on the front 
and back of the system can cause the LCD 
to flash blue to identify a particular system.

The LCD display lights amber when the 
system needs attention due to a problem 
with power supplies, fans, system 
temperature, or hard drives.

NOTE: 

If the system is connected to AC 

power and an error has been detected, the 
LCD display lights amber regardless of 
whether the system has been powered on.

5

USB connectors (2)

Connects USB 2.0-compliant devices to 
the system.

6

Video connector

Connects a monitor to the system.

7

Hard drives (optional) 

Five 3.5" drives or eight 2.5" drives.

8

Optical drive 
(optional)

Optional slimline optical drive

NOTE: 

DVD devices are data only.

Table 1-2.

Front-Panel Features and Connectors 

(continued)

Item Component

Icon

Description

Содержание PowerEdge HX574











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды