Dell PowerEdge H730P Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 101

Dell PowerEdge H730P Скачать руководство пользователя страница 11

1

Overview

The Dell PowerEdge RAID Controller (PERC) H730P storage controller card:

• Complies with serial-attached SCSI (SAS) 3.0 providing up to 12 Gb/sec throughput.
• Supports Dell-qualified serial-attached SCSI (SAS) hard drives, SATA hard drives, and solid-state drives

(SSDs).

NOTE: Mixing 512–byte native and 512–byte emulated drives are allowed. But mixing 512–byte

and 4KB native block size drives are not allowed.
NOTE: Mixing drives of different speeds (7,200 rpm, 10,000 rpm, or 15,000 rpm) and bandwidth

(3 Gbps, 6 Gbps, or 12 Gbps) while maintaining the same drive type (SAS or SATA) and

technology (HDD or SSD) is supported.

• Supports RAID levels 0, 1, 5, 6, 10, 50, and 60.
• Provides reliability, high performance, and fault-tolerant disk subsystem management.
• Supports operating system installation on 4KB drives using Unified Extensible Firmware Interface

(UEFI).

NOTE: BIOS does not support operating system installation on 4KB drives.

The following table provides PERC H730P hardware specifications.

Table 1. Hardware Specifications for PERC H730P

Specification

PERC H730P

RAID levels

0, 1, 5, 6, 10, 50, 60

Enclosures per port

Not Applicable

Processor

Dell Adapter SAS RAID-on- Chip, 8-port with LSI 3108
chipset

Backup Battery Unit (BBU)

Yes

Non-volatile cache

Yes

Cache memory

2 GB DDR3 1866 Mhz

Cache function

Write Back, Write Through, No Read Ahead, and Read
Ahead

Maximum number of virtual disks per disk
group

16

Online capacity expansion

Yes

Dedicated and global hot spares

Yes

Hot swap devices supported

Yes

Hardware XOR engine

Yes

11

«
...
9
10
11
12
13
...
»

Содержание PowerEdge H730P






































































































Отзывы:

Нет отзывов