manualshive.com logo in svg

Dell PowerEdge C8220, Руководство владельца оборудования

Поделиться
Скачать
Dell PowerEdge C8220 Скачать руководство пользователя страница 2

Notes, Cautions, and Warnings

 

NOTE: 

A NOTE indicates important information that helps you make better use of 

your computer.

 

CAUTION: 

A CAUTION indicates potential damage to hardware or loss of data if 

instructions are not followed.

 

WARNING:  

A WARNING indicates a potential for property damage, personal 

injury, or death.

____________________

Information in this publication is subject to change without notice.
© 2014 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. 
is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and  PowerEdge™ are trademarks of Dell Inc.  
Intel is a registered trademark of Intel Corporation in the U.S. and other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming 
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and 
trade names other than its own.

Regulatory Model B05B 

Regulatory Type: B05B001

2014 - 01  P/N XXXXX Rev. A05

Содержание PowerEdge C8220

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды