Dell PowerEdge 6350, Инструкция по установке и устранению неисправностей

Страница: 99 / 205

Checking Inside the Computer 7-15
6. Verify that any appropriate cables are firmly connected to their corresponding
connectors on the expansion cards.
For instructions on which cables should be attached to specific connectors on an
expansion card, see the expansion card’s documentation.
Are the appropriate cables firmly attached to their connectors?
Yes. Go to step 8.
No. Go to step 7.
7. Reconnect the cable connectors to the appropriate connectors on the expansion
cards.
Is the problem resolved?
Yes. The cable connections were loose. You have fixed the problem.
No.
Go to step 8.
8. If applicable, inspect all jumpers and configuration switches on each expansion
card.
For instructions on jumpers and configuration settings, see the expansion card’s
documentation.
Is each expansion card configured correctly?
Yes.
Go to step 10.
No. Go to step 9.
9. Reconfigure the card according to the instructions in the card’s documentation.
Is the problem resolved?
Yes.
The memory configuration of the card was incorrect. You have fixed the
problem.
No. Go to step 10.
10. Remove all expansion cards.
See “Removing an Expansion Card” in Chapter 8 for information on removing
expansion cards.
11. Close the computer panel doors, reconnect the system to the AC power source,
and turn on the system.
12. Enter the System Setup program, and update the system configuration
information.
See Chapter 4, “Using the System Setup Program,” in the system User’s Guide
for instructions.