Dell PowerConnect B-8000 Скачать руководство пользователя | Manualshive

Страница: 34 / 58

background image

22

PowerConnect B-8000 Hardware Reference Manual

53-1001788-01

PowerConnect B-8000 Management

3

NOTE

Diagnostic tests might temporarily lock the transmit and receive speed of the links during diagnostic
testing.

For information about specific diagnostic tests, see the

Fabric OS Troubleshooting and Diagnostics

Guide

.

Upgrade

If an existing PowerConnect B-8000 running under Fabric OS v6.1.2_cee is upgraded to Fabric OS
v6.3.0, an FC Ports on Demand license is required to enable the Fibre Channel functionality.
Failure to do so will result in loss of FC functionality.

PowerConnect B-8000 Management

You can use the management functions built into the PowerConnect B-8000 to monitor the fabric
topology, port status, physical status, and other information to help you analyze switch
performance and to accelerate system debugging.

The PowerConnect B-8000 automatically performs power-on self-test (POST) each time it is turned
on. Any errors are recorded in the system error log. For more information about POST, see

and boot specifications”

For information about upgrading the version of Fabric OS installed on your switch, see the

Fabric

OS Administrator’s Guide.

You can manage the PowerConnect B-8000 using any of the management options listed in

Note that if you use the command line interface, there are two sets of CLI commands, one for the
Fibre Channel features and one for the Converged Enhanced Ethernet (CEE) features. Please refer
to the

Fabric OS Command Reference Manual

or the

Converged Enhanced Ethernet Reference

for

more information on the respective CLI commands.

TABLE 3

Management Options for the PowerConnect B-8000 Switch

Management Tool

Out-of-band Support

In-band Support

Command line interface (CLI)
Up to two admin sessions and four user sessions
simultaneously. For more information, refer to the

Fabric

OS Administrator’s Guide

,

Fabric OS Command Reference

Manual

, and the

Converged Enhanced Ethernet

Command Reference

.

Ethernet or serial
connection

IP over Fibre Channel

Brocade Web Tools
For information, refer to the

Web Tools Administrator’s

Guide

.

Ethernet or serial
connection

IP over Fibre Channel

Standard SNMP applications
For information, refer to the

MIB Reference Manual

.

Ethernet or serial
connection

IP over Fibre Channel

Management Server
For information, refer to the

Fabric OS Administrator’s

Guide

and the

Fabric OS Command Reference Manual

.

Ethernet or serial
connection

Native in-band
interface
(over HBA only)

DCFM (option to purchase)
For information, refer to the DCFM documentation set.

Ethernet or serial
connection

IP over Fibre Channel

«
...
32
33
34
35
36
...
»

Содержание PowerConnect B-8000



























































Отзывы:

Нет отзывов

Похожие инструкции для PowerConnect B-8000

Бренд: Barksdale Страницы: 6

Бренд: Ubisys Страницы: 40

Бренд: Top View Страницы: 2

Бренд: IOGear Страницы: 1

Бренд: Cabletron Systems Страницы: 54

Бренд: TESmart Страницы: 4

Бренд: Phonic Страницы: 16

Бренд: WAGO Страницы: 36

Бренд: LEGRAND Страницы: 197

Бренд: Valcom Страницы: 1

Бренд: Linkskey Страницы: 2

Бренд: Aruba Networks Страницы: 40

Бренд: NVision Страницы: 92

Power Switch G0021

Бренд: G-Force Страницы: 2

SMT-8-...-B Series

Бренд: Festo Страницы: 2

Бренд: ATEN Страницы: 178

Бренд: CityGrow Systems Страницы: 21

Бренд: Gefen Страницы: 136

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды