Dell PowerConnect 7024, Руководство пользователя

Страница: 993 / 1234

Configuring OSPF and OSPFv3
993
console(config-if-vlan70)# exit
console(config)# interface vlan 80
console(config-if-vlan80)# ip ospf area 0.0.0.2
console(config-if-vlan80)# ip ospf priority 255
console(config-if-vlan80)# ip ospf cost 64
console(config-if-vlan80)#
exit
console(config)# interface vlan 90
console(config-if-vlan90)# ip ospf area 0.0.0.2
console(config-if-vlan90)# ip ospf priority 255
console(config-if-vlan90)# ip ospf cost 64
console(config-if-vlan90)# exit
Configuring Stub and NSSA Areas for OSPF and OSPFv3
In this example, Area 0 connects directly to two other areas: Area 1 is defined
as a stub area and Area 2 is defined as an NSSA area.
Figure 34-36 illustrates this example OSPF configuration.
NOTE:
OSPFv2 and OSPFv3 can operate concurrently on a network and on the
same interfaces (although they do not interact). This example configures both
protocols simultaneously.