Dell PowerConnect 7024, Руководство пользователя

Страница: 880 / 1234

880
Configuring DHCP Server Settings
Configuring a Static Address Pool
The commands in this example create an address pool that assigns the
address 192.168.2.10 to the host with a MAC address of 00:1C:23:55:E9:F3.
When this hosts sends a DHCP message requesting network information, the
switch will offer the information configured in this example, which includes a
custom DHCP option to assign the SMTP server IP address.
To configure the switch:
1 Create an address pool named “Tyler PC” and enter into DHCP pool
configuration mode for the pool.
console# configure
console(config)# ip dhcp pool "Tyler PC"
2
Specify the IP addresses that are available in the pool.
console(config-dhcp-pool)# hardware-address
00:1C:23:55:E9:F3
3 Specify the IP address and subnet mask to assign to the client.
console(config-dhcp-pool)# host 192.168.2.10
255.255.255.0
4 Specify the IP address to use as the default gateway.
console(config-dhcp-pool)# default-router
192.168.2.1
5 Specify the primary and secondary DNS servers the hosts will use.
console(config-dhcp-pool)# dns-server
192.168.2.100
console(config-dhcp-pool)# dns-server
192.168.5.101
6 Specify the domain name to be assigned to clients that lease an address
from this pool.
console(config-dhcp-pool)# domain-name
executive.dell.com
7 Specify the option that configures the SMTP server IP address to the host.
console(config-dhcp-pool)# option 69 ip
192.168.1.33
console(config-dhcp-pool)# exit