Dell PowerConnect 7024, Руководство пользователя

Страница: 90 / 1234

90
Hardware Overview
PC7048P
PowerConnect 7048P switches have an internal 1000-watt power supply
which can support up to 24 ports of PoE. The additional external power
supply (PowerConnect MPS1000) allows all 48 ports of PoE, or 24 ports of
PoE and full redundancy for the switch.
PC7048R and PC7048R-RA
PowerConnect 7048R and PowerConnect 7048R-RA switches are designed as
top-of-rack switches and include two internal, replaceable, AC power supplies
for redundant or load-sharing operation. Each power supply can provide 300
watts and includes hot-swap support. This means you do not need to power-
down the switch to remove or replace one power supply while the other power
supply is operating normally. However, it is necessary to remove power from
the power supply that is being removed or replaced.
Ventilation System
Three fans cool the PowerConnect 7024, PowerConnect 7024F, and
PowerConnect 7048. The PowerConnect 7024P and PowerConnect 7048P
each have two fans, with a third fan in the internal power supply. The
PowerConnect 7048R has two hot-swappable fan trays with one fan each.
Locator LED
The back panel includes an LED to help identify the switch within a rack or
room full of switches. From your remote management system, you can set the
LED to blink to help you or a local technician identify the physical location of
the switch. For information about how to enable the switch locator feature,
see "Using the Device View Switch Locator Feature" on page 102.
CAUTION:
Remove the power cable from the modules prior to removing the
module itself. Power must not be connected prior to insertion in the chassis.