Dell PowerConnect 7024 Скачать руководство пользователя страница 380

Страница: 380 / 1234

380

Auto Image and Configuration Update

A network DHCP server returns the following information:

• IP address and subnet mask to be assigned to the interface
• IP address of a default gateway, if needed for IP communication

After an IP address is assigned to the switch, if a hostname is not already

assigned, Auto Configuration issues a DNS request for the corresponding

hostname. This hostname is also displayed as the CLI prompt (as in response

to the

hostname

command).

Obtaining Other Dynamic Information

The following information is also processed and may be returned by a

BOOTP or DHCP server:

• Name of configuration file (the

file

field in the DHCP header or option

67) to be downloaded from the TFTP server.

• Identification of the TFTP server providing the file. The TFTP server can

be identified by name or by IP address as follows:
–

hostname: DHCP option 66 or the

sname

field in the DHCP header)

–

IP address: DHCP option 150 or the

siaddr

field in the DHCP header

When a DHCP OFFER identifies the TFTP server more than once, the

DHCP client selects one of the options in the following order:

sname

, option

66, option 150,

siaddr

. If the TFTP server is identified by hostname, a DNS

server is required to translate the name to an IP address.
The DHCP client on the switch also processes the name of the text file

(option 125, the V-I vendor-specific Information option) which contains the

path to the image file.

Obtaining the Image

Auto Configuration attempts to download an image file from a TFTP server

only if no configuration file was found in the internal flash or a USB drive, or

even with a saved configuration file that has Auto Configuration enabled.
The network DHCP server returns a DHCP OFFER message with option

125. When configuring the network DHCP server for image downloads, you

must include Option 125 and specify the Dell Enterprise Number, 674.

Within the Dell section of option 125, sub option 5 must specify the path and

name of a file on the TFTP server. This file is not the image file itself, but

rather a text file that contains the path and name of the image file. Upon

Содержание PowerConnect 7024



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PowerConnect 7024

Отзывы:

Похожие инструкции для PowerConnect 7024

Бренды по названию

Популярные бренды

Dell PowerConnect 7024, Руководство пользователя

Результаты поиска

Содержание PowerConnect 7024

Отзывы:

Похожие инструкции для PowerConnect 7024

Бренды по названию

Популярные бренды