To change the temporary settings into new default settings
1
From the printer control panel, press
.
2
Press the up or down arrow button to scroll to
Defaults
, and then press
.
3
Press the up or down arrow button to scroll to
Set Defaults
, and then press
.
Use Current
appears on the display.
4
Press
again to select
Use Current
.
To disable the settings timeout feature
You can disable the settings timeout feature if you do not want the printer to revert to the default settings after two
minutes of inactivity or after the printer is turned off.
1
From the printer control panel, press
.
2
Press the up or down arrow button to scroll to
Device Setup
, and then press
.
3
Press the up or down arrow button to scroll to
Clear Settings Timeout
, and then press
.
4
Press the up or down arrow button to scroll to
Never
, and then press
.
Resetting to factory settings
Resetting to factory default settings will delete all the printer settings you have previously selected.
Using the printer control panel menus
1
From the printer control panel, press
.
2
Press the up or down arrow button to scroll to
Defaults
, and then press
.
3
Press the up or down arrow button to scroll to
Set Defaults
, and then press
.
4
Press the up or down arrow button to scroll to
Use Factory
, and then press
.
5
When prompted to set the initial settings of your printer, make your selections using the printer control panel
buttons.
Initial Setup Complete
appears on the display.
Using a button combination (if you cannot read the current
language)
1
Turn off the printer.
Note:
If you have set the Power Saver timeout in the Setup menu, then press and hold
for three seconds to
turn off the printer.
2
From the printer control panel, press and hold
and
, and then press and release
to turn the printer on.
Note:
Do not release
and
until
Language
appears on the display, indicating that the printer has been
reset.
Using the printer control panel buttons and menus
16