Dell P114G, Руководство по обслуживанию

Страница: 36 / 57

Installing the display cable
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of display cable and provides a visual representation of the installation procedure.
1. Adhere the tape securing the display cable to the back-cover.
2. Adhere the display cable to the display back-cover.
1. Install the display bezel .
2. Install the display panel .
3. Install the display assembly .
4. Install the battery .
5. Install the base cover .
6. Follow the procedure in After working inside your computer .
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the WLAN card .
5. Remove the speakers .
6. Remove the system board .
7. Remove the display assembly .
8. Remove the power button with fingerprint reader or power-button board , whichever applicable.
9. Remove the power-adapter port .
10. Remove the touchpad .
The following image indicates the palm-rest and keyboard assembly and provides a visual representation of the removal
procedure.
After performing the steps in the pre-requisites, we are left with the palm-rest and keyboard assembly.
NOTE: System board can be removed with heatsink attached.
36 Removing and installing components