Installing the I/O board
If you are replacing a component, remove the existing component before performing the installation procedure.
The following image indicates the location of I/O board and provides a visual representation of the installation procedure.
1. Align and place the I/O board on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
3. Replace the screw (M2.5x2.5) that secures the I/O board to the palm-rest and keyboard assembly.
4. Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
5. Adhere the tape that secures the I/O board to the I/O board.
6. Using the alignment posts, close the display hinges.
1. Install the
.
2. Install the
.
3. Install the
.
After working inside your computer
.
Power-button board
Removing the power-button board
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
.
The following image indicates the location of power button and provides a visual representation of the removal procedure.
1. Remove the screw (M1.6x2) that secures the power-button bracket to the palm-rest and keyboard assembly.
2. Remove the screw (M1.6x2) that secures the power-button board to the palm-rest and keyboard assembly and lift the
power-button board off the palm-rest and keyboard assembly.
Removing and installing components
29
