Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (as indicated on the heat sink), tighten the four captive screws that secure the heat sink to the system
board.
Next steps
1. Install the
base cover
.
2. Exit
Service Mode
.
3. Follow the procedure in
After working inside your computer
.
Network-port bracket
Removing the network-port bracket
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Enter
Service Mode
.
3. Remove the
base cover
.
About this task
The following image(s) indicate the location of the network-port bracket and provide a visual representation of the removal
procedure.
40
Removing and installing components
