Steps
1. Lift the Mylar to access the memory-module slot.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Slide the memory module firmly at an angle, into the memory-module slot.
4. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 4 to install any other memory modules in your computer.
Next steps
1. Install the
base cover
.
2. Exit
Service Mode
.
3. Follow the procedure in
After working inside your computer
.
24
Removing and installing components
