Dell OptiPlex 9020 Mini Tower Скачать руководство пользователя страница 33

Страница: 33 / 59

Option

Description

•

System Password Min

•

System Password Max

Password Bypass

Allows you to bypass the

System Password

and the internal HDD password prompts

during a system restart.

•

Disabled - Always prompt for the system and internal HDD password when

they are set. This option is disabled by default.

•

Reboot Bypass - Bypass the password prompts on restarts (warm boots).

NOTE: The system will always prompt for the system and internal HDD

passwords when powered on from the off state (a cold boot). Also, the system

will always prompt for passwords on any module bay HDDs that may be present.

Password Change

Allows you to determine whether changes to the system and hard disk passwords are

permitted when an administrator password is set.

•

Allow Non-Admin Password Changes - This option is enabled by default.

TPM Security

This option lets you control whether the Trusted Platform Module (TPM) in the system

is enabled and visible to the operating system.
TPM Security - This option is disabled by default.
TPM ACPI Support
TPM PPI Deprovision Override
Clear
TPM PPI Provision Override

NOTE: Activation, deactivation, and clear options are not affected if you load the

setup program's default values. Changes to this option take effect immediately.

Computrace

This field lets you activate or disable the BIOS module interface of the optional

Computrace Service

from

Absolute Software

•

Deactivate - This option is disabled by default.

•

Disable

•

Activate

Chassis Intrusion

•

Enable - This option is enabled by default.

•

Disable

•

On-Silent

CPU XD Support

Allows you to enable or disable the execute disable mode of the processor.

•

Enable CPU XD Support - This option is enabled by default.

OROM Keyboard Access

Allows you to determine if you access the Option Read Only Memory (OROM)

configuration screens via hotkeys during boot. These settings prevent access to the

Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/F12).

•

Enable - User may enter OROM configuration screens via the hotkey.

•

One-Time Enable - User can enter the OROM configuration screens via the

hotkeys during the next boot. After the boot, the setting will revert to disabled.

•

Disable - User can not enter the OROM configuration screens via the hotkey.

Содержание OptiPlex 9020 Mini Tower




























































Результаты поиска

Содержание OptiPlex 9020 Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 9020 Mini Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 9020 Mini Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 9020 Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 9020 Mini Tower

Бренды по названию

Популярные бренды