Dell OptiPlex 9020 Mini Tower Скачать руководство пользователя страница 32

Страница: 32 / 59

Option

Description

SMART Reporting

This field controls if the hard drive errors for the integrated drives are reported during

system startup. This technology is part of the SMART (Self Monitoring Analysis and

Reporting Technology) specification.

•

Enable SMART Reporting - This option is disabled by default.

USB Configuration

This field configures the integrated USB controller. If

Boot Support

is enabled, the

system is allowed to boot any type of USB mass storage devices (HDD, memory key,

floppy).
If USB port is enabled, device attached to this port is enabled and available for

operation system.
If USB port is disabled, the operation system cannot see any device attached to this

port.
USB configuration:
For Mini-Tower, Small Form Factor the options are:

•

Enable Boot Support

•

Enable Front USB 2.0 Ports

•

Enable USB 3.0 Ports

•

Enable Rear—Left Dual USB 2.0 Ports

•

Enable Rear —Right Dual USB 2.0 Ports (default value is enable)

NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of

these settings.

Audio

Allows you to enable or disable the integrated audio controller.

•

Enable Audio (enable by default)

Miscellaneous Devices

Allows you to enable or disable various on-board devices. (For Mini Tower and Ultra

Small Form Factor)

•

Enable PCI Slot - This option is enabled by default.

Table 4. Security

Option

Description

Internal HDD_O Password

This field lets you set, change, or delete the administrator (admin) password

(sometimes called the setup password). The admin password enables several

security features.
The drive does not have a password set by default.

•

Enter the old password

•

Enter the new password

•

Confirm the new password

Strong Password

Enable strong password - This option is disabled by default.

Password Configuration

This field controls the minimum and maximum number of characters allowed for the

admin and system passwords.

•

Admin Password Min

•

Admin Password Max

Содержание OptiPlex 9020 Mini Tower




























































Результаты поиска

Содержание OptiPlex 9020 Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 9020 Mini Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 9020 Mini Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 9020 Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 9020 Mini Tower

Бренды по названию

Популярные бренды