Dell OptiPlex 9020 Mini Tower Скачать руководство пользователя страница 37

Страница: 37 / 59

Table 8. POST Behavior

Option

Description

Numlock LED

Specifies if the NumLock function can be enabled when the system boots. This option

is enabled by default.

Keyboard Errors

Specifies whether keyboard related errors are reported when it boots. This option is

enabled by default.

MEBx Hotkeys

Specifies whether the MEBx Hotkey function should be enable when the system

boots.

•

Enable MEBx Hotkey — This option is enabled by default

Table 9. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the

additional hardware capabilities provided by Intel Virtualization technology.

•

Enable Intel Virtualization Technology - This option is enabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional

hardware capabilities provided by Intel

Virtualization technology for direct I/O.

•

Enable Intel Virtualization Technology for Direct I/O - This option is enabled

by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can

utilize the additional hardware capabilities provided by Intel Trusted Execution

technology. The TPM virtualization technology, and Virtualization technology for

direct I/O must be enabled to use this feature.

•

Trusted Execution - This option is disabled by default.

Table 10. Maintenance

Option

Description

Service Tag

Displays the service tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option

is not set by default.

SERR Messages

Controls the SERR message mechanism. This option is not set by default. Some

graphics cards require that the SERR message mechanism be disabled.

Table 11. Cloud Desktop

Option

Description

Server Lookup Method

Specifies how the ImageServer looks up the server address.

•

Static IP

•

DNS (enabled by default)

Содержание OptiPlex 9020 Mini Tower




























































Результаты поиска

Содержание OptiPlex 9020 Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 9020 Mini Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 9020 Mini Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 9020 Mini Tower

Отзывы:

Похожие инструкции для OptiPlex 9020 Mini Tower

Бренды по названию

Популярные бренды