Dell OptiPlex 5050 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 68

background image

Option

Description

Deep Sleep Control

Allows you to define the controls when Deep Sleep is enabled.

•

Disabled

•

Enabled in S5 only

•

Enabled in S4 and S5

Fan Control Override

Allows you to determine the speed of the system fan. When this option is enabled, the system fan
runs at the maximum speed. This option is disabled by default.

USB Wake Support

Allows you to enable the USB devices to wake the computer from standby mode. The option

Enable

USB Wake Support

is selected by default

Wake on LAN/WWAN

This option allows the computer to power up from the off state when triggered by a special LAN
signal. This feature only works when the computer is connected to AC power supply.

•

Disabled

- Does not allows the system to power on by special LAN signals when it receives a

wake-up signal from the LAN or wireless LAN.

•

LAN

or

WLAN

- Allows the system to be powered on by special LAN or wireless LAN signals.

•

LAN Only

- Allows the system to be powered on by special LAN signals.

•

LAN with PXE Boot

- A wakeup packet sent to the system in either the S4 or S5 state, that will

cause the system to wake-up and immediately boot to PXE.

•

WLAN Only

- Allows the system to be powered on by special WLAN signals.

This option is Disabled by default.

Block Sleep

Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default.

Intel Ready Mode

Allows you to enable the capability of Intel Ready Mode Technology. This option is disabled by default.

Table 13. POST Behavior

Option

Description

Numlock LED

Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.

Keyboard Errors

Allows you to enable or disable the keyboard error reporting when the computer starts. This option is
disabled by default.

Fast Boot

This option can speed up the boot process by bypassing some compatibility steps:

•

Minimal — The system boots quickly, unless the BIOS has been updated, memory changed, or

the previous POST did not complete.

•

Thorough — The system does not skip any steps in the boot process.

•

Auto — This allows the operating system to control this setting (this works only when the

operating system supports Simple Boot Flag).

This option is set to

Thorough

by default.

Table 14. Manageability

Option

Description

USB provision

This option is not selected by default.

MEBx Hotkey

This option is selected by default.

52

System setup

«
...
50
51
52
53
54
...
»

Содержание OptiPlex 5050





































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 5050

c3700 - Workstation

Бренд: Ace Страницы: 21

Бренд: Intel Страницы: 10

Бренд: Sun Microsystems Страницы: 45

Бренд: Clarke Страницы: 4

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 56

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 69

Бренд: Asus Страницы: 28

Бренд: Asus Страницы: 28

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 2

Chromebox CN Series

Бренд: Asus Страницы: 34

Бренд: Asus Страницы: 2

Бренд: Asus Страницы: 2

Бренд: Asus Страницы: 2

Book Size Barebone System Prodigy

Бренд: Asus Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды