Dell OptiPlex 5050 Скачать руководство пользователя страница 55

Страница: 55 / 68

Software

Supported operating systems

The following list shows supported operating systems:

Table 18. Supported operating system

Supported operating systems

Operating System Description

Microsoft Windows

•

Microsoft Windows 10 Home (64-bit)

•

Microsoft Windows 10 (64-bit) Professional

•

Microsoft Windows 7 (32/64 bit) Professional

NOTE:

Microsoft Windows 7 is not supported with the

Intel 7th Generation processors.

Other

•

Ubuntu 16.04 LTS

•

Neokylin V6.0

OS Media Support

•

Optional RDVD drive

Downloading drivers

Turn on the computer.

Go to

Dell.com/support

Click

Product Support

, enter the Service Tag of your computer, and then click

Submit

NOTE:

If you do not have the Service Tag, use the auto detect feature or manually browse for your computer model.

Click

Drivers and Downloads

Select the operating system installed on your computer.

Scroll down the page and select the driver to install.

Click

Download File

to download the driver for your computer.

Navigate to the folder where you saved the driver file, after the download is complete.

Double-click the driver file icon and follow the instructions on the screen.

Downloading the chipset driver

Turn on the computer.

Go to

Dell.com/support

Click

Product Support

, enter the Service Tag of your computer, and then click

Submit

NOTE:

If you do not have the Service Tag, use the autodetect feature or manually browse for your computer model.

Click

Drivers and Downloads

Select the operating system installed in your computer.

Scroll down the page, expand

Chipset

, and select your chipset driver.

Software

Содержание OptiPlex 5050





































































Результаты поиска

Содержание OptiPlex 5050

Отзывы:

Похожие инструкции для OptiPlex 5050

Бренды по названию

Популярные бренды

Dell OptiPlex 5050, Руководство пользователя

Результаты поиска

Содержание OptiPlex 5050

Отзывы:

Похожие инструкции для OptiPlex 5050

Бренды по названию

Популярные бренды