Dell OptiPlex 5050 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 68

background image

Option

Description

•

Disable Media Card

Table 7. Video

Option

Description

Primary Display

Allows you to select the primary display when multiple controllers are available in the system.

•

Auto

•

Intel HD Graphics

NOTE:

If you do not select Auto, the on-board graphics device will be present and enabled.

Table 8. Security

Option

Description

Admin Password

Allows you to set, change, and delete the admin password.

System Password

Allows you to set, change, and delete the system password.

Internal HDD-0 Password

Allows you to set, change, and delete the computer’s internal HDD.

Internal HDD-3 Password

Allows you to set, change, and delete the computer’s internal HDD.

Strong Password

This option lets you enable or disable strong passwords for the system.

Password Configuration

Allows you to control the minimum and maximum number of characters allowed for a administrative
password and the system password. The range of characters is between 4 and 32.

Password Bypass

This option lets you bypass the System (Boot) Password and the internal HDD password prompts
during a system restart.

•

Disabled — Always prompt for the system and internal HDD password when they are set. This

option is selected by default.

•

Reboot Bypass — Bypass the password prompts on Restarts (warm boots).

NOTE:

The system will always prompt for the system and internal HDD passwords when

powered on from the off state (a cold boot). Also, the system will always prompt for
passwords on any module bay HDDs that may be present.

Password Change

This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.

Allow Non-Admin Password Changes

- This option is enabled by default.

UEFI Capsule Firmware Updates

This option controls whether this system allows BIOS updates via UEFI capsule update packages.
This option is selected by default. Disabling this option will block BIOS updates from services such as
Microsoft Windows Update and Linux Vendor Firmware Service (LVFS)

TPM 1.2 Security

Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system.

•

TPM On

•

Clear

•

PPI Bypass for Enable Commands

•

PPI Bypass for Disable Commands

•

Disabled

•

Enabled

Computrace

This field lets you Activate or Disable the BIOS module interface of the optional Computrace Service
from Absolute Software. Enables or disables the optional Computrace service designed for asset
management.

System setup

49

«
...
47
48
49
50
51
...
»

Содержание OptiPlex 5050





































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 5050

Бренд: dellonda Страницы: 6

Бренд: Elo TouchSystems Страницы: 3

ProArt PA Series

Бренд: Asus Страницы: 40

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 76

Бренд: Asus Страницы: 75

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 90

Бренд: Asus Страницы: 56

P5G43 V4-Series

Бренд: Asus Страницы: 110

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 56

Бренд: Asus Страницы: 44

Бренд: Asus Страницы: 112

Бренд: Asus Страницы: 170

Бренд: Asus Страницы: 46

Бренд: Asus Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды