Dell OptiPlex 3010 Mini-Tower Скачать руководство пользователя страница 43

Страница: 43 / 59

Troubleshooting Steps

Re-install all USB devices and check all cable connections.

LED

Power Button

Problem Description

No memory modules are detected.

Troubleshooting Steps

•

If two or more memory modules are installed, remove the modules, then reinstall one

module and restart the computer. If the computer starts normally, continue to install

additional memory modules (one at a time) until you have identified a faulty module or

reinstalled all modules without error.

•

If available, install working memory of the same type into your computer.

LED

Power Button

Problem Description

Memory modules are detected, but a memory configuration or compatibility error has
occurred.

Troubleshooting Steps

•

Ensure that no special requirements for memory module/connector placement exist.

•

Ensure that the memory you are using is supported by your computer.

LED

Power Button

Problem Description

A possible expansion card failure has occurred.

Troubleshooting Steps

•

Determine if a conflict exists by removing an expansion card (not a graphics card) and

restarting the computer.

•

If the problem persists, reinstall the card you removed, then remove a different card

and restart the computer.

•

Repeat this process for each expansion card installed. If the computer starts normally,

troubleshoot the last card removed from the computer for resource conflicts.

LED

Содержание OptiPlex 3010 Mini-Tower




























































Результаты поиска

Содержание OptiPlex 3010 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 3010 Mini-Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 3010 Mini-Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 3010 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 3010 Mini-Tower

Бренды по названию

Популярные бренды