Dell OptiPlex 3010 Mini-Tower Скачать руководство пользователя страница 51

Страница: 51 / 59

Read fault

Description The operating system cannot read from the floppy or hard drive, the computer could not find a particular

sector on the disk, or the requested sector is defective.

Requested sector not found

Description The operating system cannot read from the floppy or hard drive, the computer could not find a particular

sector on the disk, or the requested sector is defective.

Reset failed

Description

The disk re-set operation failed.

Sector not found

Description

The operating system cannot locate a sector on the floppy or hard drive.

Seek error

Description

The operating system cannot find a specific track on the floppy disk or hard drive.

Shutdown failure

Description

A chip on the system board might be malfunctioning.

Time-of-day clock stopped

Description

The battery might be dead.

Time-of-day not set-please run the System Setup program

Description

The time or date stored in System Setup does not match the computer clock.

Timer chip counter 2 failed

Description

A chip on the system board may be malfunctioning.

Содержание OptiPlex 3010 Mini-Tower




























































Результаты поиска

Содержание OptiPlex 3010 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 3010 Mini-Tower

Бренды по названию

Популярные бренды

Dell OptiPlex 3010 Mini-Tower, Руководство пользователя

Результаты поиска

Содержание OptiPlex 3010 Mini-Tower

Отзывы:

Похожие инструкции для OptiPlex 3010 Mini-Tower

Бренды по названию

Популярные бренды