Dell M4400 - Precision Mobile Workstation Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 72

background image

1.

Slide the WLAN card into the connector at a 30-degree angle to the system board.

2.

Press the card down onto the alignment post and hold in position.

3.

Replace the M2x3-mm screw to secure the WLAN card.

4.

Connect the appropriate antenna cables to the WLAN card you are installing:

If the WLAN card has two triangles on the label (white and black), connect the white antenna cable to the connector labeled "main" (white triangle), and
connect the black antenna cable to the connector labeled "aux" (black triangle). Place the remaining gray cable in the chassis next to the card.

If the WLAN card has three triangles on the label (white, black, and gray), connect the white antenna cable to the white triangle, connect the black
antenna cable to the black triangle, and connect the gray antenna cable to the gray triangle.

5.

Replace the bottom of the base assembly (see

Removing the Bottom of the Base Assembly

).

6.

Follow the procedure

After Working on Your Computer

.

Back to Contents Page

NOTICE:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and

realign the card.

NOTICE:

To avoid damage to the WLAN card, ensure the cables are not under the card when you place the card.

NOTE:

The card slot will be marked by a WLAN label. Do not install the WLAN card into any other card slot.

NOTE:

Ensure the antenna cables are routed through the cable channel.

«
...
66
67
68
69
70
...
»

Содержание M4400 - Precision Mobile Workstation









































































Отзывы:

Нет отзывов

Похожие инструкции для M4400 - Precision Mobile Workstation

Бренд: Black Box Страницы: 9

Бренд: Alacritech Страницы: 20

Бренд: Renesas Страницы: 941

Бренд: XtendLan Страницы: 228

EK-Quantum Momentum ROG Rampage VI Encore

Бренд: EK Страницы: 11

TeleCLIENT TC7730 Series

Бренд: ETL Страницы: 83

Бренд: Dahua Страницы: 113

Бренд: Aurora Страницы: 6

Бренд: S&T Страницы: 28

Бренд: Extron electronics Страницы: 19

Бренд: VIA Technologies Страницы: 2

Бренд: Kordis Страницы: 31

Бренд: IEI Technology Страницы: 106

TeleLite 720920 Series

Бренд: Positron Страницы: 21

Бренд: Black Box Страницы: 1

Бренд: TP-Link Страницы: 2

Бренд: Cypress Semiconductor Страницы: 31

Бренд: Advantech Страницы: 59

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды