Dell Latitude XPi CD, Справочное руководство

Страница: 74 / 148

4-4 Dell Latitude XPi CD Reference and Troubleshooting Guide
Figure 4-2. Main Screen of the Dell Diagnostics
C
onfirming the System
Configuration Information
When you boot the computer from your diagnostics dis-
kette, the diagnostics checks your system configuration
information and displays it in the System Configuration area on
the main screen.
The following sources supply this configuration informa-
tion for the diagnostics:
•
The system configuration information that you
selected through the system setup options
•
Identification tests of the microprocessor, the video
controller, the keyboard controller, and other key
components
•
Basic input/output system (BIOS) configuration
information temporarily saved in RAM
Do not be concerned if the System Configuration area
does not list the names of all the components or devices
you know are part of the computer. For example, you
may not see a printer listed, although you know one is
attached to the computer. Instead, the printer is listed as a
parallel port. The computer recognizes the parallel port
as LPT1, which is an address that tells the computer
where to send outgoing information and where to look
for incoming information. Because your printer is a
RAM
System Set
Video
Keyboard
Mouse
Diskette Drives
Hard-Disk Drives (Non-SCSI)
IDE CD ROM Drives
Serial/Infrared Ports
Parallel Ports
SCSI Devices
Network Interface
Audio
* The CD-ROM drive is recognized as IDE Drive 2.
NOTE: The options displayed on your screen reflect the hardware configuration of the computer system.
Dell Computer Corporation
Dell Latitude XPi CD Diagnostics Version X.XX
Processor Pentium
Memory 16 MB
Secondary Cache 256
Video SVGA,1.1 MB
Keyboard Integrated
Diskette Drives A:1.4MB, B:NONE
Serial Ports
1
Parallel Ports 1
Mouse Integrated
Modems None
SCSI Devices None
Network Interface None
Serial IR Ports Integrated
0 809MB, 1571 Cyl, 16 Hd, 63 Sec
1 NONE
2 NONE
3 NONE
IDE Drive Information*
System Configuration
Available Test Groups
Main: Run Select Subtest Options Test Limits About Key-Help Quit
Display the Run Menu.
Press Q to Quit