Dell Latitude XPi CD, Справочное руководство, Страница: 77 / 148

Running the Dell Diagnostics 4-7
Number of Times to Repeat Test(s)
This parameter specifies the number of times the tests run
when you select
RUN
. To change the default, type in the
desired value. If you type
0
(zero), the test is run until you
press <
CTRL
><
BREAK
>.
Maximum Errors Allowed
This parameter specifies the maximum number of errors
that can occur before testing is suspended. The error
count begins from zero each time you run a subtest or test
group individually or each time you select
ALL
to run all of
them. To change the default, type in the desired value. If you
type
0 (zero), testing continues, regardless of the number of
errors found, until you press <
CTRL
><
BREAK
>.
Pause for User Response
If this parameter is set to
YES
, the diagnostics pauses when
one of the following occurs:
•
Your interaction is needed to verify the Video Test
Group screens, the Keyboard Test Group key func-
tions, or other types of interaction such as inserting a
diskette.
•
The maximum error limit is reached.
To continue testing, press any key.
If the
PAUSE
parameter is set to
NO
, the diagnostics ignores
subtests that require your interaction; certain subtests can run
only if this option is set to
YES
because they require user
interaction. Set the
PAUSE
parameter to
NO
when you want to
bypass subtests that require user interaction—such as when
you run the diagnostics overnight.
Table 4-1. Option Parameters
Option Limit Possible Values
NUMBER OF TIMES TO REPEAT
TEST(S)
0001
through
9999
, or
0000
, which loops indefinitely until you press the <
CTRL
>
and <
BREAK
> keys. The default is
1
.
MAXIMUM ERRORS ALLOWED
0000
through
9999
, where
0000
means that there is no error limit. The default
is
1
.
PAUSE FOR USER RESPONSE
YES
,
NO
Allows you to decide whether tests will wait for user input. The default is
YES
to wait for user input.
OUTPUT DEVICE FOR STATUS MES-
SAGES
DISPLAY
,
PRINTER
,
FILE
If you have a printer attached to the computer, you can use it to print the status
messages, if any, that are generated when a test runs. (The printer must be
turned on and in the online mode to print.) If you select
FILE
, the status mes-
sages are printed to a file named result on the diagnostics diskette. The default
is
DISPLAY
.
OUTPUT DEVICE FOR ERROR
MESSAGES
DISPLAY
,
PRINTER
,
FILE
If you have a printer attached to the computer, you can use it to print the error
messages, if any, that are generated when a test runs. (The printer must be
turned on and in the online mode to print.) If you select
FILE
, the error mes-
sages are printed to a file named result on the diagnostics diskette. (Make sure
the diskette is not write-protected.) The default is
DISPLAY
.