Dell Latitude ST Скачать руководство пользователя

Страница: 2 / 65

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell

™

, the Dell logo, Dell Precision

™

, OptiPlex

™

Latitude

™

, PowerEdge

™

, PowerVault

™

, PowerConnect

™

OpenManage

™

, EqualLogic

™

, Compellent

™

, KACE

™

, FlexAddress

™

and Vostro

™

are trademarks of Dell Inc. Intel

, Pentium

, Xeon

Core

and Celeron

are registered trademarks of Intel Corporation in the U.S. and other countries. AMD

is a registered trademark and

AMD Opteron

™

, AMD Phenom

™

and AMD Sempron

™

are trademarks of Advanced Micro Devices, Inc. Microsoft

, Windows

Windows Server

, MS-DOS

and Windows Vista

are either trademarks or registered trademarks of Microsoft Corporation in the

United States and/or other countries. Red Hat

and Red Hat

Enterprise Linux

are registered trademarks of Red Hat, Inc. in the United

States and/or other countries. Novell

is a registered trademark and SUSE

™

is a trademark of Novell Inc. in the United States and other

countries. Oracle

is a registered trademark of Oracle Corporation and/or its affiliates. Citrix

, Xen

, XenServer

and XenMotion

are

either registered trademarks or trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware

, Virtual SMP

vMotion

, vCenter

and vSphere

are registered trademarks or trademarks of VMware, Inc. in the United States or other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their

products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

2011 - 11

Rev. A00

Содержание Latitude ST


































































Результаты поиска

Содержание Latitude ST

Отзывы:

Похожие инструкции для Latitude ST

Бренды по названию

Популярные бренды

Dell Latitude ST, Руководство пользователя

Результаты поиска

Содержание Latitude ST

Отзывы:

Похожие инструкции для Latitude ST

Бренды по названию

Популярные бренды