![background image](http://html1.mh-extra.com/html/brodit/536835/536835_quick-start-manual_2817765001.webp)
30 June, 2016, www.brodit.com, © 2016 Brodit AB
Product 536835
536835 Holder with lock. Active holder for fixed installation. With tilt swivel. With lock, 2 keys included.
The choice when you want to have your tablet safely locked in place and still easily accessable, for example in
shops, exhibitions, events, trucks, boats etc. The holder has a built-in lock, in order to take the device out from
the holder you need a key (2 keys included).
For fixed installation, provides a discreet installation without any visible cables. 12/24 Volt. E-approved. Connect
power cable with a 2 A fuse. 2 A charger. Professional installation recommended. Equipped with a tilt swivel so
you can adjust the angle and switch between portrait and landscape mode.
Tablets should not be installed onto a car’s dashboard if they block the view or block key controls. The ProClip is
designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet
onto the car’s dashboard, each combination of tablet-car must be examined in detail by you in order to determine
if such an installation is possible in the specific case. Consideration should be given to the position and how firmly
the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations
for such installations.
An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit
recommends to use tablets on the car’s headrest, installed onto the Brodit headrest mount.
Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0°C ~ +40°C
Storage temperature: -20°C ~ +80°C
RoHS compliant: ROHS
EAN: 7320285368354
Item no 536835 fits:
1 (3)