Dell Inspiron 560 Скачать руководство пользователя страница 21

Страница: 21 / 44

Back to Contents Page

Fans

Dell™ Inspiron™ 560/570 Service Manual

Removing the Processor Fan and Heat Sink Assembly

Replacing the Processor Fan and Heat Sink Assembly

Removing the Chassis Fan

Replacing the Chassis Fan

Removing the Processor Fan and Heat Sink Assembly

Follow the procedures in

Before You Begin

Remove the computer cover (see

Removing the Computer Cover

Disconnect the processor fan cable from the system board connector (see

System Board Components

Carefully move away any cables that are routed over the processor fan and heat sink assembly.

Remove the processor fan and heat sink assembly.

Inspiron™ 560

Loosen the four captive screws securing the processor fan and heat sink assembly and lift it straight up.

Inspiron 570

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your

computer from the electrical outlet before removing the cover.

WARNING:

Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

The processor fan with the heat sink is one single unit. Do not try to remove the fan separately.

CAUTION:

Do not touch the fan blades when you are removing the processor fan and heat sink assembly. This could damage the fan.

CAUTION:

Despite having a plastic shield, the processor fan and heat sink assembly may be very hot during normal operation. Be sure that it has

had sufficient time to cool before you touch it.

1 processor fan and heat sink assembly 2 processor fan cable

NOTE:

The processor fan and heat sink assembly in your computer may not look exactly like the one shown in the illustration above.

Содержание Inspiron 560













































Результаты поиска

Содержание Inspiron 560

Отзывы:

Похожие инструкции для Inspiron 560

Бренды по названию

Популярные бренды

Dell Inspiron 560, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 560

Отзывы:

Похожие инструкции для Inspiron 560

Бренды по названию

Популярные бренды