Dell Inspiron 560 Скачать руководство пользователя

Страница: 1 / 44

Dell™ Inspiron™ 560/570 Service Manual

Notes, Cautions, and Warnings

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Inspiron

are trademarks of Dell Inc.;

Intel

SpeedStep

is a registered trademark of Intel Corporation in the U.S. and other

countries;

AMD

is a trademark of Advanced Micro Devices, Inc;

Microsoft

and

Windows

are either trademarks or registered trademarks of Microsoft Corporation in the United States

and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Models: DCME and D06M Type: D06M001

November 2009 Rev. A00

Before You Begin

Technical Overview

Computer Cover

Front Bezel

Memory Module(s)

PCI and PCI Express Cards

Drives

Fans

Front I/O Panel

Processor

System Board

Power Supply

Battery

System Setup

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage, personal injury, or death.

Содержание Inspiron 560













































Результаты поиска

Содержание Inspiron 560

Отзывы:

Похожие инструкции для Inspiron 560

Бренды по названию

Популярные бренды

Dell Inspiron 560, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 560

Отзывы:

Похожие инструкции для Inspiron 560

Бренды по названию

Популярные бренды