Dell Inspiron 3471 Скачать руководство пользователя страница 71

Страница: 71 / 81

Table 6. System setup options—Security menu

Security

Admin Password

Set, change, or delete the administrator password.

NOTE:

You must set the admin password before you set the computer or

hard drive password. Deleting the admin password automatically deletes
the computer password and the hard drive password.

NOTE:

Successful password changes take effect immediately.

System Password

Set, change, or delete the system password.

NOTE:

Successful password changes take effect immediately.

Internal HDD-0 Password

Set, change, or delete the internal hard-disk drive password.

NOTE:

Successful password changes take effect immediately.

Internal HDD-1 Password

Set, change, or delete the internal hard-disk drive password.

NOTE:

Successful password changes take effect immediately.

Password Configuration

Control the minimum and maximum number of characters allowed for the Admin and
System passwords.

Password Change

Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.

By default,

Allow Non-Admin Password Changes

is selected.

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

By default,

Enable UEFI Capsule Firmware Updates

is selected.

PTT Security

Enable or disable Platform Trust Technology (PTT) visibility to the operating system.

By default,

PTT On

is not selected.

Computrace

Activate, deactivate or disable the optional Computrace software. The options are:

•

Deactivate

(default)

•

Disable

•

Activate

NOTE:

The Activate and Disable options will permanently activate and

disable (respectively) the feature and no further changes are allowed.

Master Password Lockout

When enabled, this option disables the master password support.

By default,

Enable Master Password Lockout

is not selected.

SIMM Security Mitigation

Allows you to enable or disable the additional UEFI SIMM Security Mitigation
protections.

By default,

SMM Security Mitigation

is not selected.

Table 7. System setup options—Secure Boot menu

Secure Boot

Secure Boot Enable

Enable or disable the secure boot feature.

By default,

Secure Boot Enable

is not selected.

Secure Boot Mode

Set the Secure Boot Mode to allow evaluation or enforcement of UEFI driver
signatures.

•

Deployed Mode

(default)

•

Audit Mode

Expert Key Management

Allows you to manipulate the security key databases only if the computer is in Custom
Mode.

System setup

Содержание Inspiron 3471


















































































Результаты поиска

Содержание Inspiron 3471

Отзывы:

Похожие инструкции для Inspiron 3471

Бренды по названию

Популярные бренды

Dell Inspiron 3471, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 3471

Отзывы:

Похожие инструкции для Inspiron 3471

Бренды по названию

Популярные бренды