Replacing the Back Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the hard-drive cable into the slot on the back cover.
2
Follow the instructions from step 1 to step 3 in “Replacing the
Control-
Buttons Board
”.
3
Carefully turn the back cover over and align the tabs on the back cover
with the slots on the display bezel.
4
Snap the back cover into place.
5
Replace the screws that secure the back cover to the display bezel.
6
Using your fingertips, pry the hard-drive door off the back cover.
Post-requisites
Follow the procedure from step 7 to step 12 in “Replacing the
Hard Drive
”.
24
Содержание Inspiron 20
