Removing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
Follow the instructions from step 2 to step 4 in “Removing the
Back Cover
”.
Procedure
1
Remove the screws that secure the camera module to the display bezel.
2
Peel off the Aluminium foil tape that secures the camera module and the
antenna cable to the display panel.
3
Carefully lift the camera module and turn it over.
63
Содержание Inspiron 20
