Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Connect the camera cable to the camera module.
2
Turn the camera module over.
3
Align the screw holes on the camera module with the screw holes on the
display bezel.
4
Replace the screws that secure the camera module to the display bezel.
5
Adhere the Aluminium foil tape to the camera module and antenna cable.
Post-requisites
Follow the instructions from step 3 to step 5 in “Replacing the
Back Cover
”.
65
Содержание Inspiron 20
