Dell Inspiron 1545 Service manual Скачать руководство пользователя страница 39

Страница: 39 / 51

Great user manuals database on

Replacing the Mini-Card

Remove the new Mini-Card from its packaging.

Insert the Mini-Card connector at a 45-degree angle into the appropriate system board connector. For example, the WLAN card connector is labeled

WLAN

and so on.

Press the other end of the Mini-Card down into the slot on the system board.

Replace the screw that secures the Mini-Card to the system board connector.

Connect the appropriate antenna cables to the Mini-Card. The following table provides the antenna cable color scheme for the Mini-Card supported by
your computer:

Replace the following parts based on the display adapter supported by your computer.

Mobile Intel

GMA:

Replace the base cover (see

Replacing the Base Cover

ATI Mobility Radeon:

Replace the system board (see

Replacing the System Board

Slide the battery into the battery bay until it clicks into place.

Install the drivers and utilities for your computer, as required. For more information, see the

Dell Technology Guide

Back to Contents Page

NOTICE:

When the Mini-Card is not in the computer, store it in protective antistatic packaging. For more information, see "Protecting Against

Electrostatic Discharge" in the safety information that shipped with your computer.

NOTE:

The location of the Mini-Card may change according to the display adapter supported by your computer. To find the type of display adapter on

your computer, click

Start

Control Panel

System

Device Manager

Display adapters

NOTICE:

Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.

Connectors on the Mini-Card Antenna Cable Color Scheme

WLAN (2 antenna cables)

Main WLAN (white triangle)

Auxiliary WLAN (black triangle)

white

black

NOTE:

If you are installing a communication card from a source other than Dell, you must install the appropriate drivers and utilities. For more generic

driver information, see the

Dell Technology Guide

Содержание Inspiron 1545 Service manual




















































Результаты поиска

Содержание Inspiron 1545 Service manual

Отзывы:

Похожие инструкции для Inspiron 1545 Service manual

Бренды по названию

Популярные бренды

Dell Inspiron 1545 Service manual, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1545 Service manual

Отзывы:

Похожие инструкции для Inspiron 1545 Service manual

Бренды по названию

Популярные бренды