Dell Inspiron 1545 Service manual Скачать руководство пользователя страница 32

Страница: 32 / 51

Great user manuals database on

UserManuals.info

Back to Contents Page

Hard Drive

Dell™ Inspiron™ 1545 Service Manual

Removing the Hard Drive

Replacing the Hard Drive

Removing the Hard Drive

Follow the instructions in

Before You Begin

Remove the two screws securing the hard drive assembly to the computer base.

Slide the hard drive assembly out of the bay.

Remove the two screws (one from either side) securing the hard drive cage and bezel to the hard drive.

Remove the hard drive bezel.

Lift the hard drive cage off the hard drive.

CAUTION:

If you remove the hard drive from the computer when the drive is hot,

do not touch

the metal housing of the hard drive.

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To prevent data loss, turn off your computer (see

Turning Off Your Computer

) before removing the hard drive. Do not remove the hard drive

while the computer is on or in Sleep state.

NOTICE:

Hard drives are extremely fragile. Exercise care when handling the hard drive.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working inside the

computer.

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not

covered by your warranty.

NOTE:

Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.

NOTE:

If you are installing a hard drive from a source other than Dell, you need to install an operating system, drivers, and utilities on the new hard

drive (for more information see the

Dell Technology Guide

NOTICE:

When the hard drive is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge" in the

safety instructions that shipped with your computer).

screws (2)

hard drive assembly

Содержание Inspiron 1545 Service manual




















































Результаты поиска

Содержание Inspiron 1545 Service manual

Отзывы:

Похожие инструкции для Inspiron 1545 Service manual

Бренды по названию

Популярные бренды

Dell Inspiron 1545 Service manual, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1545 Service manual

Отзывы:

Похожие инструкции для Inspiron 1545 Service manual

Бренды по названию

Популярные бренды