background image

Great user manuals database on 

UserManuals.info

Dell™ Inspiron™ 1545 Service Manual 

 

 

Notes, Notices, and Cautions 

Information in this document is subject to change without notice. 

© 2009 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

Inspiron

, and the 

DELL

 logo are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell 

under license; 

Microsoft

Windows, Windows Vista, and Windows Vista start button logo 

are either trademarks or registered trademarks of Microsoft Corporation in the United States 

and/or other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Model PP41L 

March 2009 Rev. A01 

Before You Begin

 

Base Cover

 

Hard Drive

 

Memory

 

Optical Drive

 

Processor Heat Sink

 

Processor

 

Center Control Cover

 

Keyboard

 

Internal Card With Bluetooth

® 

Wireless Technology

 

Power Board

 

Display

 

Camera (Optional)

 

Palm Rest

 

Speakers

 

Daughter Board

 

System Board

 

Wireless Mini-Card

 

Audio Connector Cover

 

Thermal Fan

 

USB Extend Cable

 

Charger Board

 

Coin-Cell Battery

 

Battery Latch Assembly

 

Flashing the BIOS

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death. 

Содержание Inspiron 1545 Service manual




















































Отзывы: