Dell Inspiron 1545 Service manual Скачать руководство пользователя страница 3

Страница: 3 / 51

Great user manuals database on

UserManuals.info

Back to Contents Page

Base Cover

Dell™ Inspiron™ 1545 Service Manual

Removing the Base Cover

Replacing the Base Cover

Removing the Base Cover

Ensure that the computer is turned off.

Remove the battery (see

Before Working Inside Your Computer

Loosen the four captive screws on the base cover and lift the cover away from the computer at an angle as shown in the figure.

Replacing the Base Cover

Align the tabs on the base cover to the bottom of the computer.

Tighten the four captive screws on the base cover.

Slide the battery into the battery bay until it clicks into place.

Back to Contents Page

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Before performing this procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer,

disconnect the modem from the wall connector and the computer, and remove any other external cables from the computer.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working inside the

computer.

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not

covered by your warranty.

CAUTION:

Do not touch the processor heat sink. Processor components should be removed only by trained support personnel.

base cover

captive screws (4)

Содержание Inspiron 1545 Service manual




















































Результаты поиска

Содержание Inspiron 1545 Service manual

Отзывы:

Похожие инструкции для Inspiron 1545 Service manual

Бренды по названию

Популярные бренды

Dell Inspiron 1545 Service manual, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1545 Service manual

Отзывы:

Похожие инструкции для Inspiron 1545 Service manual

Бренды по названию

Популярные бренды