manualshive.com logo in svg

Dell Inspiron 1545 Service manual, Руководство по обслуживанию, Страница: 18 / 51

Поделиться
Скачать
Dell Inspiron 1545 Service manual Скачать руководство пользователя страница 18

Great user manuals database on 

UserManuals.info

Back to Contents Page

  

 

 Processor  

Dell™ Inspiron™ 1545 Service Manual 

 

  

Removing the Processor 

 

  

Installing the Processor 

 

 

 

 

 

Removing the Processor  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the base cover (see 

Removing the Base Cover

).  

 

 

  

3.

Remove the processor heat sink (see 

Removing the Processor Heat Sink

).  

 

 

 

4.

To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.  
 

The ZIF-socket cam screw secures the processor to the system board. Take note of the arrow on the ZIF-socket cam screw. 

  

 

 

5.

Use a processor extraction tool to remove the processor.  
 

 

Installing the Processor  

 

CAUTION: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such 

as a connector on the back of the computer).

 

NOTICE: 

To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press to 

apply slight pressure to the center of the processor while turning the cam screw.

 

NOTICE: 

To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.

 

NOTICE: 

To help prevent damage to the system board, remove the main battery (see 

Before Working Inside Your Computer

) before working inside the 

computer.

 

NOTICE: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not 

covered by your warranty.

 

NOTICE: 

When removing the processor, pull it straight up. Be careful not to bend the pins on the processor.

1 

processor 

2 

pin-1 corner of processor 

3 

ZIF socket 

4 

ZIF-socket cam screw 

 

 

 

 

 

 

 

 

 

NOTICE: 

Ensure that the cam screw is in the fully open position before seating the processor. Seating the processor properly in the ZIF socket does not 

require force.

Содержание Inspiron 1545 Service manual




















































Отзывы:

Нет отзывов