Dell Inspiron 14 7425 2-in-1, Руководство по обслуживанию

Страница: 37 / 66

Steps
1. Place the display assembly on a clean and flat surface with the display panel facing up.
2. Gently place the palm-rest and keyboard assembly under the display hinges.
CAUTION: To avoid damaging the display, do not slide the palm-rest and keyboard assembly over the display
assembly.
3. Close the left-display hinge and align the screw holes on the left-display hinge with the screw holes on the palm-rest and
keyboard assembly.
4. Replace the two screws (M2.5x4) that secure the left-display hinge to the palm-rest and keyboard assembly.
5. Close the right-display hinge and align the screw holes on the right-display hinge with the screw holes on the system board.
6. Replace the three screws (M2.5x4) that secure the right-display hinge to the palm-rest and keyboard assembly.
7. Connect the display cable to the connector on the system board and close the latch.
8. Adhere the tape that secures the display-cable connector latch to the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Fan
Removing the fan
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following image indicates the location of the fan and provides a visual representation of the removal procedure.
Removing and installing components 37