Dell Inspiron 14 7425 2-in-1 Скачать руководство пользователя страница 28

Страница: 28 / 66

About this task

NOTE:

The M.2 card installed on your computer will depend on the configuration ordered. Supported card configurations on

the M.2 card slot:

●

M.2 2230 solid-state drive + 2230 mounting bracket

●

M.2 2280 solid-state drive

The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal
procedure.

Steps

1. Remove the screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly.
2. Slide and remove the solid-state drive from the solid-state drive slot.

Installing the M.2 2280 solid-state drive

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

NOTE:

The M.2 card installed on your computer will depend on the configuration ordered. Supported card configurations on

the M.2 card slot:

●

M.2 2230 solid-state drive + 2230 mounting bracket

●

M.2 2280 solid-state drive

The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the
installation procedure.

Removing and installing components

Содержание Inspiron 14 7425 2-in-1



































































Результаты поиска

Содержание Inspiron 14 7425 2-in-1

Отзывы:

Dell Inspiron 14 7425 2-in-1, Руководство по обслуживанию, Страница: 28 / 66

Результаты поиска

Содержание Inspiron 14 7425 2-in-1

Отзывы: