About this task
The following image indicates the location of the power button with optional fingerprint reader and provides a visual representation of the
installation procedure.
Steps
1. Align and place the power button on the palm-rest and keyboard assembly.
2. Adhere the fingerprint-reader board (optional) and the power-button cable on the palm-rest and keyboard assembly.
3. Replace the two screws (M2x2.5) that secure the power button with fingerprint reader to the palm-rest and keyboard assembly.
4. Align and place the power-button bracket on the power button.
5. Replace the screw (M2x2) that secures the power-button bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the
2. Install the
.
3. Install the
4. Install the
.
5. Follow the procedure in
after working inside your computer
.
System board
Removing the system board
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
.
4. Remove the
5. Remove the
solid-state drive in M.2 slot one
.
6. Remove the
solid-state drive in M.2 slot two
.
7. Remove the
.
8. Remove the
54
Removing and installing components
