background image

Unpacking Your Printer 

 

1.

Select a location for your printer. 
 

l

Leave enough room to open the printer tray, covers, doors, and options. It is also important to allow enough space around the printer for proper 
ventilation.  
 

l

Provide the proper environment:  
 

l

A firm, level surface 
 

l

Away from the direct airflow of air conditioners, heaters, or ventilators 
 

l

Away from sunlight, extreme humidity, or wide fluctuations in temperature 
 

l

A clean, dry, and dust-free location  
 

2.

In addition to the 

Dell Laser Printer 1110

, ensure that you have the following items in the box. If there is a missing item, contact Dell:  

 

 

a.

 

The appearance of the power cord may differ according to your country's specifications.  

b.

 

The 

Drivers and Utilities

 CD contains the Dell printer driver, Dell™ Toner Management System, and an HTML User's Guide.

  

3.

Save the carton and packing material in case the printer needs to be repacked. 
 

4.

Remove the packing tape from the printer. 
 
 

  

 
 

About Your Printer  

These are the main components of your printer. The following illustrations show the standard Dell Laser Printer 1110: 

 

 

Front View 

 

NOTE: 

Leave the printer in the box until you are ready to set it up.

  

Starter Toner 

Cartridge  

  

Power Cord

a

  

 

Drivers and Utilities

 

CD

b

  

  

Owner's Manual 

 

Setup Diagram 

 

NOTE: 

The power cord must be plugged into a grounded power socket.

Содержание Inspiron 1110
















































Отзывы: