Dell G15 5510, Руководство по обслуживанию

Страница: 36 / 75

4. Lift the power-adapter port, along with its cable, off the palm-rest and keyboard assembly.
Installing the power-adapter port
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power-adapter port and provides a visual representation of the installation
procedure.
Steps
1. Place the power-adapter port into the slot and adhere the power-adapter port cable on the palm rest and keyboard
assembly.
2. Connect the power-adapter port cable to the system board.
3. Align and place the power-adapter port bracket over the power-adapter port.
4. Replace the two screws (M2x4) to secure the power-adapter port bracket to the system board.
Next steps
1. Install the rear cover
2. Install the base cover .
3. Follow the procedure in After working inside your computer .
Fans
Removing the right fan
Prerequisites
1. Follow the procedure in Before working inside your computer .
36 Removing and installing components