Dell FS7500, Установка и настройка, Страница: 72 / 88

• Enter
\\ service_ip_address \ share_name
.
• Click
Connect using a different user name
.
5. In the Connect As dialog box, enter a valid user name and password, then click OK. Note that you can enter
CIFSstorage\administrator for a user name and the CIFS password that you set previously.
The user can now log in to the CIFS share and perform read and write operations. The default permission is to
disallow guest access. You can modify the share to allow guest access.
Accessing an NFS Export
If you plan to use NFS over UDP, do the following first:
1. Adjust the firewall to allow the FS7500 controllers to be the source IP.
2. Open the firewall to allow for port ranges.
To mount an NFS export on a UNIX system, log in as
root
and run the
mount
command with the following
recommended options and parameters.
Note:
While the command example shows the recommended parameters, you can change the protocol to UDP
and the NFS version to 2.
mount -o rw,bg,hard,nointr,tcp,vers=3,timeo=2,retrans=10,rsize=32768,wsize=32768
client_access_vip
:/
exported_directorylocal_directory
The
exported_directory
must be the full path name that you specified when creating the NFS export.
Because the default trusted user setting is "All except root,” only users other than
root
can access the export.
You can modify the export and change the trusted users to “Nobody” or “All.”
In addition:
• The default client access permission provides access to all clients. You can modify the export and limit
access to specific IP addresses.
• The default access type is read-write. You can modify the export and change it to read-only.
66
EqualLogic FS7500 Installation and Setup
6 NAS Storage Allocation